Method 2: Search Employee Name
Method 3: Browse Employee List
Enroll Fingers
Tap Manager
Enter the manager Badge ID (9999) and tap Enter
Tap Enroll Finger
Select a method to choose the employee
Method 1: Enter Badge ID
Enter the employee’s Badge ID and tap Enter
Method 2: Search Employee Name
Enter the employee’s name and tap Enter
Tap the employee’s name and tap Select
Method 3: Browse Employee List
Scroll through the list and tap the employee’s name, then tap Select
After selecting the employee, the clock will display a biometric consent statement. Scroll
through the statement and tap Accept.
Tap the icon to select the finger to enroll.
Note: Thumb, Index, Middle and fingers give better results than Ringer fingers and Thumbs. If you are having trouble getting a good enrollment, try using a finger or thumb on the non-dominant hand.
Have the employee place their finger on the sensor on top of the clock. Repeat for all three
boxes.
The screen will display a quality score.
The results screens vary, depending on the enrollment score. This table explains how to handle
each type of score:
- Good Enrollment - No action needed. After a few seconds, the confirmation screen
closes and you can move to any next steps. You may also tap the screen to move to the
next step. - Fair Enrollment - Do one of the following:
- Tap Retry: Re-scan the same finger and try to achieve a Good enrollment.
- Tap Change Finger: Select a different finger to scan.
-
Tap Accept Best: If you have tried enrolling each finger without achieving a Good
enrollment, tap Accept Best and then go to Confirm finger scan.
- Poor Enrollment - Do one of the following:
- Tap Retry: Re-scan the same finger and try to achieve a Good enrollment.
- Tap Change Finger: Select a different finger to scan.
-
Tap Accept Best: If you have tried enrolling each finger without achieving a Good
enrollment, tap Accept Best. If you accept a Poor enrollment, you can use only
biometric verification or biometric identification with badge ID at the timeclock.
This means that you must first enter a badge ID before scanning the finger that
you enrolled. Go to Confirm finger scan.
Confirm the enrollment by scanning the finger again.
If the scan is accepted, the screen will display the following message:
At this point, the manager may choose to enroll a secondary finger for the employee or enroll
another employee.
Punch In/Out
Tap Punch In/Punch Out
Enter your Badge # and tap Enter
Scan your finger
If the punch is accepted, the following message will display:
Punch Restrictions
If the employee has a punch restriction (cannot punch in early, cannot punch out late, cannot
punch in from early from lunch/break, ec), the clock will reject the punch with the follow
message:
Early Punch Override
A manager may override the punch restriction at the clock to allow an employee to punch
outside their scheduled time.
Tap Manager.
Enter your Badge ID:
Enter the manager password.
Tap Allow Early Punch
Enter the employee’s badge ID.
The punch is accepted.